Transfercase blowout np 205, np 208's, axle shafts, dodge hubs/calipers/spindles, etc - Texas 4x4 Forum

Go Back   Texas 4x4 Forum > Classifieds > For Sale

Photo Gallery Places to Wheel Gallery III Home Forum Tech Section IRCChat FlashChat

For Sale Parts, builders and rigs

Texas4x4.org is the premier all all Forum on the internet. Registered Users do not see the above ads.

For Sale:

Transfercase blowout np 205, np 208's, axle shafts, dodge hubs/calipers/spindles, etc



Reply
 
Share LinkBack Thread Tools Display Modes
Old 07-26-2010, 06:24 PM   #1
Rock Stacker
 
Join Date: Oct 2005
Location: Crosby, Tx
Posts: 243
stx4wheeler rock stacker
Transfercase blowout np 205, np 208's, axle shafts, dodge hubs/calipers/spindles, etc

Most of these parts were collected by me to build a doubler or another project. I have found a complete doubler so I need sell this stuff to cover the cost.

Pics are located in the link below

http://s553.photobucket.com/albums/j...eeler/forsale/

GM NP 205 fixed yoke, round 6 bolt pattern, 32 spline short input, case has been rebuilt and gone thru completely. No shifter- sold

GM Sm465/205 round pattern adapter to be used with 32 spline trans-$50

Twin stick np 205 shifter boot new in box, boot only- sold

GM NP 208 slip yoke 27 spline input for th350/700R4 I believe. No shifter or front output flange, but come with rear slip yoke output-sold

GM NP 208 slip yoke 32 spline input for sm465/th400. No shifter or front output flange, but comes with rear slip yoke output.-$75

Chevy np 208 floor shifter with boot,indicator, brackets and hardware sold

Ford NP 208 fixed yoke 31 spline input . I was going to use the fixed yoke parts to convert my Chevy slip yoke case to fixed yoke, like MuddinManny has done. Can show buyer how do do this swap in detail. No yokes, no shifter- $30

2- stock dana 60 chevy/dodge 30 spline stubs shafts- $40 a piece or $70 for two.

2 chevy/dodge/ ford solid dana 44 stock stub shafts-$25 each or $40 for the pair.

Dodge dana 44 parts, 2 spindles, two cast hubs, two rotors, two calipers, 2 caliper brackets, one set of new pads, one used. I think I have the old bearings and spindle locknuts for these as well. NO locking hubs.- These are 6 bolt spindles and MIGHT work great for swapping a chevy 10 bolt or 44 to 5 on 5.5 lug pattern- $40

Pelican 11ft 6inch sit on top fishing kayak has typical wear and tear for a kayak that is 2 yrs old. I upgraded and no longer use it. It is a great entry level boat that is good to see if you like kayak fishing. They retail for around $400 new at Academy. - sold

All items located in Crosby, Tx. I do a lot of traveling to the valley from Houston so I can possibly help with delivery if you are on my way. I will ship small items on your dime. The only things I would be interested in for trade would be gm 35 spline dana 60 stub shafts, np 203 32 spline input gear, or a working air compressor with a tank larger than 25 gallons. All prices are obo, shoot me an offer worse I can do is say no.
__________________
tires are like boobs they look big until you play with them for a while, then you just want a bigger set!

03 Powerstroke
78 Bronco mall crawler, 6"on 37 iroks
79 Chevy truggy tbi 350/sm465/203/205, dana 60's, and 42's

Last edited by stx4wheeler; 08-06-2010 at 08:45 PM..
stx4wheeler is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 07-26-2010, 06:50 PM   #2
Trail Blazer
 
Join Date: Nov 2004
Location: Edna, TX
Posts: 403
greatwhitez71 just gettin started
pics of the 205 please....oops nevermind...out read myself.

interested in 205. will pm
greatwhitez71 is offline   Reply With Quote
Old 07-26-2010, 06:52 PM   #3
Rock Stacker
 
Join Date: Oct 2005
Location: Crosby, Tx
Posts: 243
stx4wheeler rock stacker
Pics should be in the link at the top of the add.
__________________
tires are like boobs they look big until you play with them for a while, then you just want a bigger set!

03 Powerstroke
78 Bronco mall crawler, 6"on 37 iroks
79 Chevy truggy tbi 350/sm465/203/205, dana 60's, and 42's
stx4wheeler is offline   Reply With Quote
Old 07-27-2010, 11:29 AM   #4
Rock Stacker
 
Join Date: Oct 2005
Location: Crosby, Tx
Posts: 243
stx4wheeler rock stacker
Sale pending on the np 205. Offers on anything else?
__________________
tires are like boobs they look big until you play with them for a while, then you just want a bigger set!

03 Powerstroke
78 Bronco mall crawler, 6"on 37 iroks
79 Chevy truggy tbi 350/sm465/203/205, dana 60's, and 42's
stx4wheeler is offline   Reply With Quote
Old 07-27-2010, 08:37 PM   #5
Rock Stacker
 
Join Date: Oct 2005
Location: Crosby, Tx
Posts: 243
stx4wheeler rock stacker
Alright, Im trying to get a feeler to see if anyone is interested in the parts that will be coming off my truggy before I pull them. The axles would be great in a sammi, jeep, or chevy half ton.

sbc-sm465/np 205 figure 8 pattern- comes out of a working driving truck. The bad the clutch is on its way out, and every once and a while it sticks a little going into third. It will come with a trans shifter, and tcase shifter, bellhousing, and linkage(no pedals though) and I can also throw in another used clutch that still has good life left in it. The used clutch is a centerforce II. Tcase has the factory flange on the front output, and the rear is a 1310 or 1330 u-bolt style yoke. -$250

All 10 bolts-sold

I will only sell the parts listed below if a buyer for the axles is found, but if interested post up and I can put you inline for the parts.

4 inch front half ton lift springs- $75

6-35x12.5x15's all tires have 80- percent tread but are showing some cracks and dry rot. I can vouch that the 4 on my rig now hold air the other two I have no idea. 2 are general grabber At's, 1 is a yokohama mt, 1 trail blazer mt. The other two are another trail blazer A/T, and a bfg A/T. The tires will come mounted on the following wheels 4 15x10 chrome mod wheels with some rust that have been painted black, 2 factory ralleye wheels. They are great for a deerlease or trail rig, but I wouldn't trust them on the road.- sold
__________________
tires are like boobs they look big until you play with them for a while, then you just want a bigger set!

03 Powerstroke
78 Bronco mall crawler, 6"on 37 iroks
79 Chevy truggy tbi 350/sm465/203/205, dana 60's, and 42's

Last edited by stx4wheeler; 08-06-2010 at 08:49 PM..
stx4wheeler is offline   Reply With Quote
Old 07-29-2010, 02:52 PM   #6
newbie
 
Join Date: Jan 2006
Location: Houston (Highlands), TX
Posts: 36
StanMcMurrey just gettin started
PM sent on Kayak.
StanMcMurrey is offline   Reply With Quote
Old 07-30-2010, 08:38 AM   #7
Rock Stacker
 
Join Date: Oct 2005
Location: Crosby, Tx
Posts: 243
stx4wheeler rock stacker
Sale pending on axles
__________________
tires are like boobs they look big until you play with them for a while, then you just want a bigger set!

03 Powerstroke
78 Bronco mall crawler, 6"on 37 iroks
79 Chevy truggy tbi 350/sm465/203/205, dana 60's, and 42's
stx4wheeler is offline   Reply With Quote
Old 08-01-2010, 06:23 PM   #8
Wheelin MadMan
 
Join Date: Jan 2006
Location: DFW
Posts: 777
whiplash776 Spotterwhiplash776 Spotterwhiplash776 Spotter
Interested in the Dodge Dana44 parts. What year/truck were they off of? Pics? Are the rotors in decent shape?

Do you ever make it up to Dallas or know someone who does?
__________________
stock '87 Ramcharger

4bbl360-727-208
Vacc disco D44-9.25
whiplash776 is offline   Reply With Quote
Old 08-02-2010, 06:24 AM   #9
Rock Stacker
 
Join Date: Oct 2005
Location: Crosby, Tx
Posts: 243
stx4wheeler rock stacker
I think the 44 Hubs were from like an 86 ramcharger. I might be able to get the to Wylie this weekend if my buddy drives down. I also will be in Allen in two weeks for a wedding. I don't get up to Dallas to much other than that.


List updated with a couple price changes and sold items. Axles are pending pickup.
__________________
tires are like boobs they look big until you play with them for a while, then you just want a bigger set!

03 Powerstroke
78 Bronco mall crawler, 6"on 37 iroks
79 Chevy truggy tbi 350/sm465/203/205, dana 60's, and 42's
stx4wheeler is offline   Reply With Quote
Old 08-05-2010, 04:45 PM   #10
Poser
 
Join Date: Dec 2006
Location: Lucas, Tejas
Posts: 98
TXTJ is a jewel in the roughTXTJ is a jewel in the roughTXTJ is a jewel in the rough
Also interested in the Dodge D44 parts, do you have any pic's? I'm just outside of Allen as well...
__________________
'99 TJ Sport: 5.7L Hemi / Slush Box / Atlas 4.3 / Spider 609's / 39" Red Label Krawlers / 106" Wheelbase

'81 CJ-8 Scrambler: Resto-Mod Under Construction, 5.9L Dodge Magnum / Slush Box / Undecided Transfer Case / HP D44 Front / FF D60 Rear / 35" BFG KM2's

Intelligence and Common Sense are Inversly Proportional!

The American Indians discovered what happens when you don't control imigration.
TXTJ is offline   Reply With Quote
Old 08-06-2010, 08:51 PM   #11
Rock Stacker
 
Join Date: Oct 2005
Location: Crosby, Tx
Posts: 243
stx4wheeler rock stacker
List updated.

No I don't have any
pics of the dodge stuff, they look like normal rotor/spindles nothing fancy. I think I also have the caliper bracket as well.
__________________
tires are like boobs they look big until you play with them for a while, then you just want a bigger set!

03 Powerstroke
78 Bronco mall crawler, 6"on 37 iroks
79 Chevy truggy tbi 350/sm465/203/205, dana 60's, and 42's
stx4wheeler is offline   Reply With Quote
Old 08-10-2010, 02:14 PM   #12
Poser
 
Join Date: Dec 2006
Location: Lucas, Tejas
Posts: 98
TXTJ is a jewel in the roughTXTJ is a jewel in the roughTXTJ is a jewel in the rough
Just looking for condition of parts...When are you heading to Allen? Can you verify what all you have?
__________________
'99 TJ Sport: 5.7L Hemi / Slush Box / Atlas 4.3 / Spider 609's / 39" Red Label Krawlers / 106" Wheelbase

'81 CJ-8 Scrambler: Resto-Mod Under Construction, 5.9L Dodge Magnum / Slush Box / Undecided Transfer Case / HP D44 Front / FF D60 Rear / 35" BFG KM2's

Intelligence and Common Sense are Inversly Proportional!

The American Indians discovered what happens when you don't control imigration.
TXTJ is offline   Reply With Quote
Sponsored Links
Advertisement
 
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Dodge 44 Axle shafts and cheap tires, ford 208,etc stx4wheeler For Sale 3 02-16-2009 01:59 PM


All times are GMT -6. The time now is 10:24 AM.


3.8.7 - Powered by vBulletin
Copyright 2002-2012 Texas4x4.org

SEO by vBSEO 3.6.0