Texas 4x4 Forum banner

Built FJ-80 axle, Toyota rear 4340 shafts, Toy PSC PS pump, tons of other stuff

6K views 39 replies 13 participants last post by  gonefishin 
#1 · (Edited)
Located in Jersey Village (NW Houston)
some pictures:
https://picasaweb.google.com/scott.n.lynda/ForSaleStuff?feat=directlink

Prices are negotiable - just ask

Toyota Parts:
SOLD – late model (86~95) Toyota All-Pro Chrmo shafts
$30 for all, $10ea - (3) Toyota OEM mini-truck rear axle shafts– wide (late model, 86~95)

SOLD! $1000 – Complete Toyota FJ-80 front axle with blah...

$50 - (2) FJ-80 OEM front longside inner axle shafts
$20 - FJ-80 OEM front shortside inner axle shaft
SOLD - pair of Toyota Aisin 30 spline drive flanges (from FJ-80 axle, works on mini-truck axles too) GREAT FOR TRAIL RIGS - or to carry as a spare hub.
$100 - (4) Asin hubs, two with IFS slugs, others empty. Need rebuild. (3) Aisin hub lock dials, one w/o gear
$30 - bearing hub mounted on spindle with bearings (used as spares to hold spare tire in bed)
SOLD $100 - PSC power steering pump for 22RE, scribed 1500 psi on back
$30 - (2) 22RE AC Compressors
$20 - Toyota 8” V6 4:10 reverse cut (high pinion) gears on welded carrier
$50 - 8” 4.56 Richmond 4cyl gears
$30 – Toyota driveshaft (used as spare)
$10 – radiator from ’91 truck with 22RE, small crack at outlet that can be welded. Going to scrap metal if no buyer.
$10 - tilt steering column from ~95 truck. Lock removed

Other stuff:
SOLD $50 – (2) Alcan leaf springs from Toyota front, 6 leafs, centerpin moved ~1" forward ~4.5" lift from SAS conversion. 41.75 eye/eye, 21.75/20 to centerpin
pending - (1) Warn roller fairlead, never used, still in bag
Free - Set of Ford 9” shafts, 28 spline, I think small brg
$10 - D60 open carrier
$20 - (2) Dodge chrome dually wheel insets ($90ea online)
$25 OBO - Chevy 5.3 manifolds (2000 vintage)
$25 OBO - Chevy 6.0 exhaust manifolds (2002 vintage)
Free - Dropped pitman arm – Dodge? YJ?
pending - 4” lift blocks, from 1999 Dodge 2500 4x4

PM here or text to 713-829-2972
Scott
 
See less See more
#4 ·
Scott I'll take the shocks. I'll call you today once I get out of work.
 
#9 ·
it is an IFS box off a '91 Toyota truck.
The PSC pump is off a 22RE - it was with the kit that they sell with a ram. I will look for a number tonight.
I think the Alcans have about 4.5" lift - pin should be 1" or 1.5" from center From a SAS conversion
 
#8 ·
power steering pump

What is the number on the PS pump? I am needing one and wondering if it is the one I need.
 
#10 ·
#15 ·
the gearbox is missing one of the three cast-in mounting flanges. I was cleaning it up tonight and noticed - guess it's been sitting in the garage for too many years since I switched to full hydro.
I texted you a picture of the gearbox.
 
#20 ·
I'll sell it for a $1000 and include a FJ-80 axle with it that you can part out.

$1000 for a set up High Pinion 3rd member with 5.29 gears and detroit locker and solid spacer is a deal in itself. You can't get that anywhere else.

Have you priced reverse rotation gears...

also - EACH one of those birfields runs $300
http://www.longfieldsuperaxles.com/products/FJ%2d80-BIRFIELD.html

The shafts are running around $125 each, hubs?

Ohh - I forgot, one side even has a 4340 inner hub gear $60:
http://www.longfieldsuperaxles.com/products/TOYOTA-INNER-HUB-GEAR.html

So - long story short, no, I will wait and possible seperate from this cluttered post.
 
#23 ·
The differential off set to one side or the other, rather than in the middle.
 
#24 ·
It's a stock 1992 FJ-80 housing, passenger drop - so where ever Toyota put it...2finger

I might be able to measure tonight, going to the Rodeo cookoff tonight after Lemons race track time this afternoon.
 
#31 ·
no - I'll box it up. If you just want the ends, can I cut the tube out to make it easier to box up? I'll just take the chop saw to it an inch or so past the weld at the end.
 
#35 ·
I still have a bunch of little stuff that I just don't feel right throwing in the trash - just make an offer, I really want this stuff out of the garage...
 
#39 ·
Hmm - so i just walked out there to measure and I couldn't find them. I don't remember selling them but I guess I did.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top