Texas 4x4 Forum banner

Crusher's DIY4x Competition Dash Install

3K views 0 replies 1 participant last post by  SKULL CRUSHER 
#1 ·
It's been a long time coming guy's. This is a awesome upgrade for me i don't know if you seen my work of a custom dash but let just say it nothing compaired to whats going in.

So Oct 28, i started the tear down of the dash. For me it was pretty simple since i really have nothing there but a few screws and wire, the crusher has no ac no doors it a rock crawling rig. For those of you wanted this dash for daily driver they come with all the ac and heater Vents, that you need to keep it running stock.The radio's to all the switchis for the rear window and blinker lights and glove box. The Crusher Dash is pretty simple just a gauge lay out, glove box, and Switch panel with push button start and new Radio insert. :toast:



Old Getto set up strpot



Taking out the old dash was pretty simple once everything and wire was removed and marked with tap. All it took was 3 bolts on the drivers side and two on the passengers side, and Two little bolts on the steering column and another tiny bolt on the front center, for it to be lose. The dash does take some cutting to get it out i used some sheet metal snips and cut it out within 15 min it was pretty simple. I guess there really no going back one u cut it out guys. I do have video coming of me pulling out the dash and what it took. All in all for me it only took about 40 min. Remember i had no dash to pull apart or top pad or even any crazy electrical stuff. I have already been torn out along time ago. And other will have to take there time to pull all the connection an wire up and Ac Vents and heater system.
hacck


Here is a pic of the dash all layed out.
It comes in two pieces not one complete peace.:cool:



Now to get to work on the Wiring making it Right and SAFE.



More pics and Video to come... rockonn
 
See less See more
5
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top