Ford dana 60 front/sterling 10.25 rear and lots of other parts - Texas 4x4 Forum

Go Back   Texas 4x4 Forum > Classifieds > For Sale

Photo Gallery Places to Wheel Gallery III Home Forum Tech Section IRCChat FlashChat

For Sale Parts, builders and rigs

Texas4x4.org is the premier All All Forum on the internet. Registered Users do not see the above ads.

For Sale:

Ford dana 60 front/sterling 10.25 rear and lots of other parts



Reply
 
Share LinkBack Thread Tools Display Modes
Old 07-10-2009, 06:00 PM   #1
Rock Stacker
 
Join Date: Oct 2005
Location: Crosby, Tx
Posts: 246
stx4wheeler rock stacker
Ford dana 60 front/sterling 10.25 rear and lots of other parts

I have a dana 60 front that originally came out of a 1989 ford f-350. I have fully rebuilt the axle and converted it to use ford's radius arm suspension(used in f-100,f-150, and fullsize bronco's from 1976-1979) setup which uses coils springs. This axle would be perfect for someone with a late 70's ford who wants to swap to 1-ton axles with very little work. It would also be perfect for someone looking to swap a soild axle into their bronco or f-150. You could also remove the radius arm wedges and lower trac bar mounts since they have been welded on, and convert it back to a leaf sprung setup. The axle was built in the middle of 2007 using all new parts. I has been sitting in my covered garage for almost the last year. Specs below

Specs:

1989 ford dana 60 front king pin
4.10 ratio
welded carrier
New master install kit that includes all new bearings for the gears
New Inner axle seals
New calipers/rotors/pads/ hard brake lines/ Seals
New wheel bearings
New u-joints installed in both driver and passengerside axle shafts
New king pins
New hi-steer arm on passengerside so that crossover steering can be used
New arp heavy duty studs for the hi- steer arm
Knuckles drilled out to use 3/4 heims
New radius arm wedges from jeffs bronco graveyard
New spindle mounting studs
Axle has tabs for hydro assist
Has custom lower trac bar mount

Bad
THIS AXLE WILL NOT COME WITH THE STEERING OR TRAC -BAR THAT IS PICTURED
Also there is a dent in the front differential cover that does not affect the gears, and can probably be pounded out .

Also i will throw in the a matching sterling 10.25 rear end with 4.10 gears, and a welded carrier. Drums were turned and new shoes installed when the front axle was built.

$1150.00 will not ship


Also, I have a set of factory ford radius arms that have been plated for strength and lengthened 12" and use a 1" heim, along with the mounts for the frame that these require. a set of 6 inch super flex coils that can be thrown in for some more cash, and will only be sold with the axle or after the axle has been sold.

Ford np 208 came from a parts truck, shifted fine- $25

Sterling 10.25 shafts- $50

4- bfg all terrains 315/75 or 85(i can't remember)/17 about 1/3 tread left- $80

set of dana 44 axle wedges new from bronco graveyard new in box - $90

complete saginaw setup for a 460 came out of a van or car i believe, comes with pump,new hoses, bracket for the motor and new belt- $80

1 set of ford dana 60 front 4.10's, pinion has some small chips/flakes at the top of it i think three or four of the teeth have these, but i dont believe that they even contact the ring when set up- $30

1 78 ford f-250 brake booster and master cylinder worked when pulled- $20

1 hood scoop attaches with 3m tape summit racing part number sum-470700-$20

1 summit racing vacuum resevior to help build extra vacuum if you have a big cam- $20

1 chevy saginaw power steering pump with built in resevior, comes with hoses, and pulley-$25

1 76 ford 4 inch drop pitman arm -$20


I prolly have other items that I will update with and I can get pics of the items if need be. I will only ship the axle wedges, dana 60 gears, vacuum canister, and saginaw setup, pitman arm, and the rest is pickup only.


link to axle pics

http://tamor.org/forums/showthread.php?t=11116


all items located in houston, tx
__________________
tires are like boobs they look big until you play with them for a while, then you just want a bigger set!

03 Powerstroke
78 Bronco mall crawler, 6"on 37 iroks
79 Chevy truggy tbi 350/sm465/203/205, dana 60's, and 42's
stx4wheeler is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 07-12-2009, 01:20 PM   #2
 
Join Date: Jul 2009
Posts: 6
dobiepaq just gettin started
spare parts

hello
would you happen to have a married C6(460ci) & NP205 just laying around... maybe....
I currently have this in my 78 E250 4x4... I've been half heartedly looking & can't find anything local(Beaumont, Orange) & when I thought I did, they wanted what I thought was to much $$(500.00) for a used combo...
I see these things for $150.00 ea. or $250.00 - $350.00 a combo up north or even in Florida, Georgia there is a couple of gentlemen selling the combo for said price.....
I think I will start calling salvage yards in Houston & Beaumont Monday...
Put a want ad here might help...
any leads would be greatly appreciated...
thanks
Micah
[email protected]
dobiepaq is offline   Reply With Quote
Old 07-12-2009, 04:48 PM   #3
newbie
 
Join Date: Jun 2009
Location: Abilene, TX
Posts: 13
dentdriver just gettin started
very interested in the axles can you please sent pictures,,,, [email protected]
dentdriver is offline   Reply With Quote
 
Old 07-12-2009, 09:05 PM   #4
Rock Stacker
 
Join Date: Oct 2005
Location: Crosby, Tx
Posts: 246
stx4wheeler rock stacker
http://tamor.org/forums/showthread.php?t=11116

here is a link to some pics call me at 713 670 4535 and we can talk.
__________________
tires are like boobs they look big until you play with them for a while, then you just want a bigger set!

03 Powerstroke
78 Bronco mall crawler, 6"on 37 iroks
79 Chevy truggy tbi 350/sm465/203/205, dana 60's, and 42's
stx4wheeler is offline   Reply With Quote
Old 07-12-2009, 09:06 PM   #5
Rock Stacker
 
Join Date: Oct 2005
Location: Crosby, Tx
Posts: 246
stx4wheeler rock stacker
no i dont have any of these parts

Quote:
Originally Posted by dobiepaq View Post
hello
would you happen to have a married C6(460ci) & NP205 just laying around... maybe....
I currently have this in my 78 E250 4x4... I've been half heartedly looking & can't find anything local(Beaumont, Orange) & when I thought I did, they wanted what I thought was to much $$(500.00) for a used combo...
I see these things for $150.00 ea. or $250.00 - $350.00 a combo up north or even in Florida, Georgia there is a couple of gentlemen selling the combo for said price.....
I think I will start calling salvage yards in Houston & Beaumont Monday...
Put a want ad here might help...
any leads would be greatly appreciated...
thanks
Micah
[email protected]
__________________
tires are like boobs they look big until you play with them for a while, then you just want a bigger set!

03 Powerstroke
78 Bronco mall crawler, 6"on 37 iroks
79 Chevy truggy tbi 350/sm465/203/205, dana 60's, and 42's
stx4wheeler is offline   Reply With Quote
Sponsored Links
Advertisement
 
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
700r4/205 setup warn XD 9000 winch dana 60 gears obijuan For Sale 25 11-27-2008 09:52 PM
Lots & lots of stuff for sale j20m715 For Sale 15 02-26-2008 07:07 PM
Chevy Parts and lots more Big4x4ride For Sale 8 11-03-2007 04:36 PM
Dana 60 build up for Stealth Krawler Stretch Projects Forum 36 01-09-2006 08:58 PM


All times are GMT -6. The time now is 04:28 AM.


3.8.8 - Powered by vBulletin
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright 2002-2012 Texas4x4.org
 

SEO by vBSEO 3.6.0