CNC Plasma, Router, Torch Tables - Texas 4x4 Forum

Go Back   Texas 4x4 Forum > News Desk > Vendors Forum

Photo Gallery Places to Wheel Gallery III Home Forum Tech Section IRCChat FlashChat

Vendors Forum Please visit our sponsors

Texas4x4.org is the premier All All Forum on the internet. Registered Users do not see the above ads.

Vendors Forum:

CNC Plasma, Router, Torch Tables



Reply
 
Share LinkBack Thread Tools Display Modes
Old 01-09-2012, 07:41 AM   #1
Trail Blazer
 
Join Date: Dec 2011
Location: Hutto TX
Posts: 490
BurnTables just gettin started
Smile CNC Plasma, Router, Torch Tables

Made in Texas!

Prices start at $6300.00

www.BurnTables.com

(512) 843-2621

Table sizes (cutting area):


2' x 4'

4' x 4'

4' x 8'

5' x 10'

Custom sizes welcome



Standard Features:

3 axis movement

Torch height control for Plasma Cutting operations

Computer with all necessary hardware

Open design to allow easy loading of material with fork lift

Cable Carriers

Ball bearings and timing belt reduction

Rack and pinion drive for x and y axis

Gantry is driven by drive shaft from both sides for high precision movement

CAD, Cam, and Machine Software Included!

Plug and play system with minimal setup from customer.

Free Training for our customers at our facility in Hutto TX.

Free Email and Phone Support for Life!

DSC02301.JPG
DSC02191.jpg
Engrave_1.jpg


__________________
CNC Plasma, Router, Water Jet, & Torch Tables

BurnTables.com

(512) 843-2621
http://www.facebook.com/BurnTables

Last edited by BurnTables; 01-25-2012 at 02:23 PM..
BurnTables is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 01-09-2012, 08:53 AM   #2
Full speed...half lit
 
Awesome Bill's Avatar
 
Join Date: May 2008
Location: amarillo
Posts: 7,882
Awesome Bill Surfs Venus with AnubisAwesome Bill Surfs Venus with AnubisAwesome Bill Surfs Venus with AnubisAwesome Bill Surfs Venus with AnubisAwesome Bill Surfs Venus with AnubisAwesome Bill Surfs Venus with AnubisAwesome Bill Surfs Venus with AnubisAwesome Bill Surfs Venus with AnubisAwesome Bill Surfs Venus with AnubisAwesome Bill Surfs Venus with AnubisAwesome Bill Surfs Venus with Anubis
Very nice!


Welcome to Texas4x4!
__________________
70 fj40...v8, 1tons, 241/205 and 42's
92 fj80...the wife mobile, cummins, 1tons
Texas Trail Buggy
www.hhfabinc.com


Quote:
Originally Posted by HelenaAG View Post
Hey Guys,

I am giving you a heads up that ads are coming.....
Awesome Bill is offline   Reply With Quote
Old 01-10-2012, 02:29 AM   #3
Trail Blazer
 
Join Date: Nov 2011
Location: Kempner,TX-Dubai,U.A.E.
Posts: 610
WheelsUp just gettin started
hopefully one day I will have enough need for one of these~
__________________
Derrek,

Some people spend their money on stuff that looks nice but they never use.... I spend my money on stuff I can abuse!!

OFFROADING~'98 Dodge, Rockwells, 47's, Exo-Cage, TooMuchWheelbase- work in progress.. But aren't they all!!

TUGGING~ '05 Dodge 3500, CTD, SRW- soon to be DRW(ok not soon, but the next time I get home!)

KRUZING~ '59Impala, '56Pickup, '50Styleline, '00 slammed dually
WheelsUp is offline   Reply With Quote
 
Old 01-10-2012, 05:46 AM   #4
Undele' vato
 
Join Date: May 2005
Location: "San Antone"
Posts: 4,970
dott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubis
So, the head can sense the height of the material?
You don't have to program the vertical movement?
What software do you use?
Can it be programmed with MasterCam?
__________________
Proposed 28th Amendment
"Congress shall make no law that applies to the citizens of the United States that does not apply equally to the Senators and Representatives; and, Congress shall make no law that applies to the Senators and Representatives that does not apply equally to the citizens of the United States".

Git R Dun
My pic folder.
dott is offline   Reply With Quote
Old 01-10-2012, 07:05 AM   #5
Trail Blazer
 
Join Date: Dec 2011
Location: Hutto TX
Posts: 490
BurnTables just gettin started
Quote:
Originally Posted by WheelsUp View Post
hopefully one day I will have enough need for one of these~
The need is there, you just got to realize where its at.
__________________
CNC Plasma, Router, Water Jet, & Torch Tables

BurnTables.com

(512) 843-2621
http://www.facebook.com/BurnTables
BurnTables is offline   Reply With Quote
Old 01-10-2012, 07:08 AM   #6
Trail Blazer
 
Join Date: Dec 2011
Location: Hutto TX
Posts: 490
BurnTables just gettin started
Quote:
Originally Posted by dott View Post
So, the head can sense the height of the material?
You don't have to program the vertical movement?
What software do you use?
Can it be programmed with MasterCam?
Yes the head senses the material, and no you don't program the height of the material. You can use mastercam, but the software we use (sheetcam) to turn the drawing into a cut file is very easy to use but at the same time very capable.
__________________
CNC Plasma, Router, Water Jet, & Torch Tables

BurnTables.com

(512) 843-2621
http://www.facebook.com/BurnTables
BurnTables is offline   Reply With Quote
Old 01-11-2012, 09:29 AM   #7
Trail Blazer
 
Join Date: Dec 2011
Location: Hutto TX
Posts: 490
BurnTables just gettin started
I received this email from a happy customer today!

Quote:
Hello Kyle:

Jeremy and I are almost finished with your first project using the CNC router you built for us. So far, all have gone very smoothly and after a dozen or so test cuts, we cut the inlay panels for our cabinet. I have attached a few photos to show how well all has worked. Thanks for the table and I am standing by to go flying when you have the time. Jim.

__________________
CNC Plasma, Router, Water Jet, & Torch Tables

BurnTables.com

(512) 843-2621
http://www.facebook.com/BurnTables
BurnTables is offline   Reply With Quote
Old 01-18-2012, 11:16 AM   #8
Trail Blazer
 
Join Date: Dec 2011
Location: Hutto TX
Posts: 490
BurnTables just gettin started
New Colors!!

DSC02401.JPG

DSC02405.JPG

DSC02404.JPG
__________________
CNC Plasma, Router, Water Jet, & Torch Tables

BurnTables.com

(512) 843-2621
http://www.facebook.com/BurnTables
BurnTables is offline   Reply With Quote
Old 01-22-2012, 07:07 PM   #9
Trail Blazer
 
Join Date: Dec 2011
Location: Hutto TX
Posts: 490
BurnTables just gettin started
Getting ready for the race!!

buggy.jpg
__________________
CNC Plasma, Router, Water Jet, & Torch Tables

BurnTables.com

(512) 843-2621
http://www.facebook.com/BurnTables
BurnTables is offline   Reply With Quote
Old 01-23-2012, 09:11 AM   #10
Trail Blazer
 
Join Date: Dec 2011
Location: Hutto TX
Posts: 490
BurnTables just gettin started
More pictures

__________________
CNC Plasma, Router, Water Jet, & Torch Tables

BurnTables.com

(512) 843-2621
http://www.facebook.com/BurnTables
BurnTables is offline   Reply With Quote
Old 01-23-2012, 01:32 PM   #11
Super Moderator
 
Bruiser's Avatar
 
Join Date: Feb 2003
Location: Diana, Texas
Posts: 10,819
Bruiser Surfs Venus with AnubisBruiser Surfs Venus with AnubisBruiser Surfs Venus with AnubisBruiser Surfs Venus with AnubisBruiser Surfs Venus with AnubisBruiser Surfs Venus with AnubisBruiser Surfs Venus with AnubisBruiser Surfs Venus with AnubisBruiser Surfs Venus with AnubisBruiser Surfs Venus with AnubisBruiser Surfs Venus with Anubis
Very nice looking products, both the crawler and tables!



__________________
1985 Dodge Crew Cab Cummins--Full Resto Underway....
2015 RAM ECODiesel--DD/Tow Rig
Bruiser is offline   Reply With Quote
Old 01-24-2012, 06:13 PM   #12
Trail Blazer
 
Join Date: Dec 2011
Location: Hutto TX
Posts: 490
BurnTables just gettin started
A customers 4x8 table.

__________________
CNC Plasma, Router, Water Jet, & Torch Tables

BurnTables.com

(512) 843-2621
http://www.facebook.com/BurnTables
BurnTables is offline   Reply With Quote
Old 01-25-2012, 08:29 AM   #13
Trail Blazer
 
Join Date: Dec 2011
Location: Hutto TX
Posts: 490
BurnTables just gettin started
Laser ($500K), 1/2" steel.

hole laser.JPG

Burntables Plasma 1/2" steel, 65 amp torch ($9k).

hole plasma.JPG
__________________
CNC Plasma, Router, Water Jet, & Torch Tables

BurnTables.com

(512) 843-2621
http://www.facebook.com/BurnTables
BurnTables is offline   Reply With Quote
Old 01-26-2012, 09:42 AM   #14
Trail Blazer
 
Join Date: Dec 2011
Location: Hutto TX
Posts: 490
BurnTables just gettin started
4x2:
DSC02485.JPG

DSC02487.JPG
__________________
CNC Plasma, Router, Water Jet, & Torch Tables

BurnTables.com

(512) 843-2621
http://www.facebook.com/BurnTables
BurnTables is offline   Reply With Quote
Old 01-28-2012, 09:58 AM   #15
Trail Blazer
 
Join Date: Dec 2011
Location: Hutto TX
Posts: 490
BurnTables just gettin started
Strong!!

DSC02588.jpeg

IMG_0360.jpeg
__________________
CNC Plasma, Router, Water Jet, & Torch Tables

BurnTables.com

(512) 843-2621
http://www.facebook.com/BurnTables
BurnTables is offline   Reply With Quote
Old 04-04-2012, 10:15 AM   #16
Trail Blazer
 
Join Date: Dec 2011
Location: Hutto TX
Posts: 490
BurnTables just gettin started
The THC system that is on our tables was completely developed by us here at BurnTables, it is by far the easiest THC system to use, but has all the features that a $5,000 system would and more!

-Adjustable torch height control, pierce height control, pierce delay, anti dive speed, and torch adjustment speed, all adjustable on the fly while cutting!

-All settings are saved, even in the event of power loss!

-Do you only want the system to reference the pierce height, but not use the thc for that occasional odd cut part, yes it can!

-Consumable wearing out but still cutting, but the height has changed because of the wear on the consumable? Don't change it out, get more life out of your consumables, adjust the torch height by the turn of the knob, on the fly while your cutting!

-Are you getting slag build up on the nozzle? Don't stop cutting, raise your pierce height with the turn of the knob, save time make money!

-Cutting the holes in you part at a slower speed but don't want the THC to fight you and drive the torch into the material, With BurnTables antidive features, complete adjustability, and you guessed it.... on the fly! Keeps the torch from diving down in corners also, no matter how slow you go!

-Need cut a part out of a already bent part, with the BurnTables z axis ability to travel 6" and the Automatic Torch Height control, you can cut up to 45 degree bent parts.

-Have a situation that you need to completely turn off the THC, but yet need the functionality of the z axis to raise and lower between cuts, yep got it covered.

Did we mention that this all Standard on ALL of our CNC Tables!
__________________
CNC Plasma, Router, Water Jet, & Torch Tables

BurnTables.com

(512) 843-2621
http://www.facebook.com/BurnTables

Last edited by BurnTables; 04-04-2012 at 11:20 AM..
BurnTables is offline   Reply With Quote
Old 04-05-2012, 06:49 PM   #17
Trail Blazer
 
Join Date: Dec 2011
Location: Hutto TX
Posts: 490
BurnTables just gettin started
BurnTables is offline   Reply With Quote
Old 04-06-2012, 09:53 AM   #18
Trail Blazer
 
Join Date: Dec 2011
Location: Hutto TX
Posts: 490
BurnTables just gettin started
__________________
CNC Plasma, Router, Water Jet, & Torch Tables

BurnTables.com

(512) 843-2621
http://www.facebook.com/BurnTables
BurnTables is offline   Reply With Quote
Sponsored Links
Advertisement
 
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Airforce Plasma torch. $200 FSJeeper For Sale 13 07-22-2011 08:59 PM
Plasma cutter ???????? j20m715 Tool Time 36 02-12-2008 08:00 AM


All times are GMT -6. The time now is 12:51 AM.


3.8.8 - Powered by vBulletin
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright 2002-2012 Texas4x4.org
 

SEO by vBSEO 3.6.0