D60 tie rod - Texas 4x4 Forum

Go Back   Texas 4x4 Forum > Classifieds > Wanted

Photo Gallery Places to Wheel Gallery III Home Forum Tech Section IRCChat FlashChat

Wanted Parts and Vehicles

Texas4x4.org is the premier All All Forum on the internet. Registered Users do not see the above ads.

Wanted:

D60 tie rod



Reply
 
Share LinkBack Thread Tools Display Modes
Old 09-24-2006, 10:46 AM   #1
Undele' vato
 
Join Date: May 2005
Location: "San Antone"
Posts: 4,970
dott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubis
D60 tie rod

The rod that goes between both knuckles.
__________________
Proposed 28th Amendment
"Congress shall make no law that applies to the citizens of the United States that does not apply equally to the Senators and Representatives; and, Congress shall make no law that applies to the Senators and Representatives that does not apply equally to the citizens of the United States".

Git R Dun
My pic folder.
dott is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 09-24-2006, 10:11 PM   #2
Wheels 4 Food
 
mudgod's Avatar
 
Join Date: Apr 2004
Location: Palestine, TX
Posts: 5,743
mudgod Surfs Venus with Anubismudgod Surfs Venus with Anubismudgod Surfs Venus with Anubismudgod Surfs Venus with Anubismudgod Surfs Venus with Anubismudgod Surfs Venus with Anubismudgod Surfs Venus with Anubismudgod Surfs Venus with Anubismudgod Surfs Venus with Anubismudgod Surfs Venus with Anubismudgod Surfs Venus with Anubis
I have one from ORD. 1.5" x .25". I paid over 125 or 150. Whatever they are on there web site. I'll sell it for 100$. Ship on your dime.
__________________

P.I.Z.Z.A. I want pizza! P.I.Z.Z.A. I want pizza!



"we'll raise up our glasses against evil forces singin....whiskey for my men... for my horses"
mudgod is offline   Reply With Quote
Old 09-24-2006, 11:08 PM   #3
Undele' vato
 
Join Date: May 2005
Location: "San Antone"
Posts: 4,970
dott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubis
I looked on their site but am not sure If I saw it listed.

Here's what I found at ORD
"Tie Rod prices:
1 1/8 and 1 1/4 OD tubes: $85.00
1 1/2" OD tubes: $115.00"

I'm assuming this is the price for only the tube?

The 1-1/4" is 1/4" wall and the 1-1/2" is 3/8" wall. Either way they only go up to 7/8" fine thread. My TRE has 1" threads on it.

What type of ends does yours have?
__________________
Proposed 28th Amendment
"Congress shall make no law that applies to the citizens of the United States that does not apply equally to the Senators and Representatives; and, Congress shall make no law that applies to the Senators and Representatives that does not apply equally to the citizens of the United States".

Git R Dun
My pic folder.

Last edited by dott; 09-24-2006 at 11:15 PM..
dott is offline   Reply With Quote
 
Old 09-25-2006, 06:24 AM   #4
Wheels 4 Food
 
mudgod's Avatar
 
Join Date: Apr 2004
Location: Palestine, TX
Posts: 5,743
mudgod Surfs Venus with Anubismudgod Surfs Venus with Anubismudgod Surfs Venus with Anubismudgod Surfs Venus with Anubismudgod Surfs Venus with Anubismudgod Surfs Venus with Anubismudgod Surfs Venus with Anubismudgod Surfs Venus with Anubismudgod Surfs Venus with Anubismudgod Surfs Venus with Anubismudgod Surfs Venus with Anubis
That was why I told you where I got it bcause I could not remember the price.
I'll check on the ends later, But I'm sure it has 7/8 fine thread. Left and right.
__________________

P.I.Z.Z.A. I want pizza! P.I.Z.Z.A. I want pizza!



"we'll raise up our glasses against evil forces singin....whiskey for my men... for my horses"
mudgod is offline   Reply With Quote
Old 09-25-2006, 06:44 AM   #5
Undele' vato
 
Join Date: May 2005
Location: "San Antone"
Posts: 4,970
dott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubis
Quote:
Originally Posted by mudgod
That was why I told you where I got it bcause I could not remember the price.
I'll check on the ends later, But I'm sure it has 7/8 fine thread. Left and right.
I wasn't questioning the price, just details. You said it has 1/4" wall. As far as I can see, they dont offer the 1-1/2" rod with 1/4 wall (I guess that leaves the 1-1/4" bar instead) . Also, are you including the ends or not? My knuckles still have the tapered holes (large end of taper on top).

Thanks.
__________________
Proposed 28th Amendment
"Congress shall make no law that applies to the citizens of the United States that does not apply equally to the Senators and Representatives; and, Congress shall make no law that applies to the Senators and Representatives that does not apply equally to the citizens of the United States".

Git R Dun
My pic folder.
dott is offline   Reply With Quote
Old 09-25-2006, 06:55 AM   #6
Wheels 4 Food
 
mudgod's Avatar
 
Join Date: Apr 2004
Location: Palestine, TX
Posts: 5,743
mudgod Surfs Venus with Anubismudgod Surfs Venus with Anubismudgod Surfs Venus with Anubismudgod Surfs Venus with Anubismudgod Surfs Venus with Anubismudgod Surfs Venus with Anubismudgod Surfs Venus with Anubismudgod Surfs Venus with Anubismudgod Surfs Venus with Anubismudgod Surfs Venus with Anubismudgod Surfs Venus with Anubis
No ends. I used them on the new rod I got. I needed one for crossover steer. The rod I got was the biggest one they had.
__________________

P.I.Z.Z.A. I want pizza! P.I.Z.Z.A. I want pizza!



"we'll raise up our glasses against evil forces singin....whiskey for my men... for my horses"
mudgod is offline   Reply With Quote
Old 09-25-2006, 06:57 AM   #7
Undele' vato
 
Join Date: May 2005
Location: "San Antone"
Posts: 4,970
dott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubis
Quote:
Originally Posted by mudgod
No ends. I used them on the new rod I got. I needed one for crossover steer. The rod I got was the biggest one they had.
OK, I would need to find ends for that rod then. I'll let you know. BTW, the end I have is 1-18 thread.
__________________
Proposed 28th Amendment
"Congress shall make no law that applies to the citizens of the United States that does not apply equally to the Senators and Representatives; and, Congress shall make no law that applies to the Senators and Representatives that does not apply equally to the citizens of the United States".

Git R Dun
My pic folder.
dott is offline   Reply With Quote
Old 09-25-2006, 09:32 AM   #8
Trail guide
 
Join Date: Apr 2003
Location: Bartlett, TX
Posts: 302
ringmaster4x4 just gettin started
I have a complete stock tie rod
__________________
http://community.webshots.com/user/ringmaster4x4


(Mud Frog) 1972 K5,454,SM465/NP205 ,18" Over Stock,44" GH Tires, D60/14BFF,on a custom twin framerail tube chassis.
(RICE KILLA) 1972 Chevelle 325ci TR224 On 112/2002 Camaro 6 Speed T56,4 wheel power disc, 12 bolt w/ eaton & 3.55,
1999 Dodge 2500 4x4 Ext. Cab S/B Cummins 5 Speed (DD)
ringmaster4x4 is offline   Reply With Quote
Old 09-25-2006, 02:27 PM   #9
Undele' vato
 
Join Date: May 2005
Location: "San Antone"
Posts: 4,970
dott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubis
Quote:
Originally Posted by ringmaster4x4
I have a complete stock tie rod
I think I found one close to home, I'll let you know if I need yours.
Thanks.
__________________
Proposed 28th Amendment
"Congress shall make no law that applies to the citizens of the United States that does not apply equally to the Senators and Representatives; and, Congress shall make no law that applies to the Senators and Representatives that does not apply equally to the citizens of the United States".

Git R Dun
My pic folder.
dott is offline   Reply With Quote
Old 09-29-2006, 10:42 PM   #10
Lock-tite
 
Chaparro_Mike's Avatar
 
Join Date: Nov 2004
Location: San Antonio
Posts: 458
Chaparro_Mike will become famous soon enoughChaparro_Mike will become famous soon enough
also have a stock tie rod but if your looking for a rod that is 1 1/2 , 1/2 thick dom tubing with taped ends for either 3/4 or 7/8 hiems. factory tubular has them for about 110 shipped. not bad for what you get, I recommend the 3/4 because after your drill out the knuckles for a 3/4 bore it leaves plenty of strength on the knuckles and 3/4 is plenty strong for steering. run mine pretty hard and no problems.
__________________
Built not Bought
CJ Krawler
Chaparro_Mike is offline   Reply With Quote
Old 09-30-2006, 12:08 PM   #11
Undele' vato
 
Join Date: May 2005
Location: "San Antone"
Posts: 4,970
dott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubisdott Surfs Venus with Anubis
Quote:
Originally Posted by Chaparro_Mike
factory tubular has them for about 110 shipped.
Thanks for the tip. I straightened mine as best I can. It has 1-18 threaded tie rods. I got one from TXfireman to carry as a spare (straightened it also).

On another note, I did some research on tubing. I called several tubing distributors. I considered a lot of options from buying a single piece just to replace my tie rod to buying a whole stick, enough to make 5 tie rods. The bottom line is shipping eats up any savings and you have to buy a lot of tubing to get a good price. So, I decided that making my own from NEW tubing is not worth it. If I can find some tubing at Ashley or something, it would be.

I can get a 1-1/5 4340 stressproof solid tie rod from WTO with a left and right threads on the ends for $95. If he throws in the lefty TRE and jam nuts I can get all of that for $145 + about $20 for freight. I would use my existing TRE for the pass side. This is the deal I used to compare the cost of manking my own.
__________________
Proposed 28th Amendment
"Congress shall make no law that applies to the citizens of the United States that does not apply equally to the Senators and Representatives; and, Congress shall make no law that applies to the Senators and Representatives that does not apply equally to the citizens of the United States".

Git R Dun
My pic folder.
dott is offline   Reply With Quote
Sponsored Links
Advertisement
 
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 12:33 PM.


3.8.8 - Powered by vBulletin
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright 2002-2012 Texas4x4.org
 

SEO by vBSEO 3.6.0